Pipe calculators / Flow, velocity & diameter
Define the pipe. Follow the flow.
Pressure Head Calculator
Convert a pressure difference to equivalent fluid head.
Your pipe & operating inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
h = Δp/(ρg); g = 9.80665 m/s².
Convert a pressure difference to equivalent fluid head.
- Confirm the fluid state, geometry, flow regime and units.
- Enter actual dimensions and justified operating conditions.
- Submit the form, then interpret the result with the assumptions and limits below.
Pressure head depends on density and is not a volume flow rate.
Pressure Head: assumptions and applications
Convert a pressure difference to equivalent fluid head. Pressure head depends on density and is not a volume flow rate.
Use the actual measured bore rather than assuming a nominal pipe label equals its inside diameter. Schedule, lining, corrosion and deposits can change the effective flow area. Enter the applicable fluid properties at the operating temperature.
A flow rate, velocity, pressure difference and capacity describe different physical quantities. The stated model determines which additional measurements are needed. The calculated examples below vary one input while holding all other printed values fixed.
Continue with: Pipe Flow Calculator · Pipe Velocity Calculator · Pipe Diameter Calculator · Bernoulli Pipe Pressure Calculator
Check the numbers
Pressure Head Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Pressure difference = 100 kPa; Fluid density = 998.2 kg/m³.
| Output | Computed result |
|---|---|
| Equivalent pressure head | 10.21555 m head |
| Pressure | 14.503774 psi |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 50 kPa | Pressure difference | 5.107775 m head |
| 75 kPa | Pressure difference | 7.661663 m head |
| 100 kPa | Pressure difference | 10.21555 m head |
| 125 kPa | Pressure difference | 12.769438 m head |
| 150 kPa | Pressure difference | 15.323325 m head |
| 200 kPa | Pressure difference | 20.4311 m head |
Unchanged inputs use: Pressure difference = 100 kPa; Fluid density = 998.2 kg/m³. Results retain the model limitations described above.
Common questions
What is the main limitation of this calculation?
Pressure head depends on density and is not a volume flow rate.
How are the comparison-table numbers generated?
Each row changes the labelled pressure difference from the worked example. The other printed inputs remain fixed. The table uses the same h = Δp/(ρg); g = 9.80665 m/s². method as the form.
How do I use this pressure head calculator?
Convert a pressure difference to equivalent fluid head. h = Δp/(ρg); g = 9.80665 m/s².
Can I calculate in metric and imperial units?
The dimension selector converts the labelled length inputs. Flow and property inputs retain their explicitly printed units. Results include related units where meaningful; US gallons and Imperial gallons are different units.
Can I export this calculation to Excel?
Calculate first, then use Export CSV for results and inputs. This is a numeric text export, not an Excel formula workbook, desktop application or certified engineering report.
What do the starting values mean?
They are editable numerical examples. Actual bore, fluid state, roughness, geometry and boundary conditions must match the installation. A calculated result is not a pressure rating or code sizing approval.
Where are the formula sources?
The sources below show plain-text addresses. Equations, examples and tables are stored in these pages; the calculator does not fetch source websites or JSON data files during use.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- US DOE — DOE-HDBK-1012/3-92, Thermodynamics, Heat Transfer, and Fluid Flow, Volume 3https://www.energy.gov/sites/default/files/2026-04/DOE-HDBK-1012-92_VOL3.pdf
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors